Support

How do I change the IP address of my Prosilica camera?

GigEIPConfig

Prosilica provides a tool called GigEIPConfig which can be used to set the IP Address configuration of Prosilica GigE Vision cameras. The IP This application is installed automatically when installing the Prosilica Sample Viewer program. It can be found under Start>All Programs>Prosilica.

 

GigEIPConfing can configure Prosilica's GigE Vision camera to AutoIP, Fixed IP, and DHCP addressing modes. This tool can also set a fixed address and subnet.

If you change the IP configuration of the camera, be sure to make the necessary changes to your network adaptor to ensure proper operation of the camera.

 

Categories: GigE Cameras, GE-Series, GC-Series, GB-Series, GS-Series, GX-Series

 

Back to overview